AUTONET TV

How Tired Are Your Tires? (Tire replacement)

Of the things you think about most, your tires are probably pretty far down the list. That’s understandable because today’s tires are engineered to do their job without needing you to pay too much attention to them. But they DO wear out, and worn tires can contribute to skidding in bad weather, not being able to stop, a ride full of uncomfortable vibrations and, even a sudden blowout. Yikes. Let’s figure out right now how to know if your tires need replacing!

Let’s face it. Most of us don’t know the first thing about tires. So, the best way to make sure what shape yours are in is to take your vehicle to a qualified service facility to have the tires checked out by a trained technician.  Here are things they’ll check:

• Tread.  Tread is the part of the tire that touches the road surface.  Different tires have different tread patterns and something called tread blocks - the raised rubber parts that contact the road. The longer a tire has been on a vehicle, the more of that rubber wears off.  The technician will check to see if there’s enough of that tread left on your tire for sufficient traction to accelerate, steer, and brake.
• Pressure. It’s important your tires be inflated properly so your tires will perform the way they’re designed while driving.  If your tires have low air pressure, the technician will check to see why, perhaps cracks in the sidewall from age, a nail in the rubber picked up on the road, or bulges. It’s also important your tires are not overinflated too.
• Wear.  Your tires should wear evenly.  If they haven’t, the uneven wear can cause vibrations that you can feel in the steering wheel.  Maybe the whole vehicle shakes at a certain speed.  Your vehicle may require other services such as balancing, alignment, or suspension repairs to prevent future tire damage.
• Age.  Your tires may have adequate tread, but if they’re too old, it’s time for new. Rubber gets old, and when it does, it loses its elasticity.  Ever find an old rubber band and tried to stretch it? It’s brittle and will break easily. Hotter climates will age rubber—and tires—faster. All tires have their date of manufacture stamped on them, so your service adviser will be able to see when your tires were made.

If it’s time to replace your tires, you’ll find you have many choices for new ones: different brands, models, designs, etc.  Your service adviser can help you figure out which ones are right for you. It’s much better—and safer—to do it before one of them fails at the least opportune time.

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net

Some New Boots (Suspension Maintenance)

There are some boots that don't come in a shoe box and aren't worn on your feet.  They are called axle or CV boots, and they can be important parts for many vehicles.

That CV stands for constant velocity.  CV axles are mainly used in front-wheel drive and all-wheel drive vehicles. They're also used in some rear-wheel drive vehicles with independent suspensions.  They have two CV joints, one inner and one outer, placed between the axle and the drive wheels.  That way the vehicle's engine power can drive the wheels, no matter what angle they are.  They also adjust for the different speeds wheels turn as they go around corners. 

Because roads are full of all sorts of hazards (dirt, oil, water, grime), these CV joints need to be protected.  They also have grease in them to keep the bearings moving smoothly.  That's the job of the rubber boots that are supposed to keep that debris out.  These CV or axle boots are made of rubber or plastic and usually last a long time without any problem.  But sometimes they fail, either from being hit by debris or age causing the rubber or plastic to deteriorate.  That can allow the grease to leak out of the joint and the moisture to get in.  And that's where the trouble is.

So it's important to have a vehicle's CV boots checked periodically, especially when they begin to have more than 100,000 miles/160,000 kilometers on them.  A technician inspects them for tears or cracks.  Sometimes if the problems are found early enough, the boots can be replaced and the joints can be re-packed with grease. 

But sometimes the CV joint can wear out even though the boot is intact.  When the CV joint fails, you might hear a grinding, humming or clicking noise and feel vibration.

Some of these can be difficult to access for service, so many service advisors will recommend replacing the joints and boots at the same time.  Just remember, new CV boots won't make a fashion statement, but they will keep your vehicle going down the road for years to come.

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net